Tag Archives: Ana White

Using Vaseline to Distress Aged Aqua Cabinet

From Drab to Fab:


photo 2

AgedAquaCabinet1

 


This is one of my favorite knockoffs. I fell in love with Ethan Allen’s Ming Media console. However, I didn’t love the  $1800 price tag. I went to Ana White’s website and found a similar plan. Ana has over a 1,000 free D.I.Y plans. Here is the plan I modified:http://ana-white.com/2011/10/benchmark-media-console. I also collaborated with the best designer in town, Tanya Padgett who helped me come up with “right” dimensions for my space. You can check out her fabulous”ness” on her Facebook page: https://www.facebook.com/pages/Creative-Designs-by-Tanya

Ana showcased my DIY aged aqua cabinet on her site. Since then, I’ve had a lot of questions asking how I finished this piece. So, I thought I would explain how I achieved my aged aqua look with vaseline. Yep, vaseline. It was easy, cheap and fun! Read on.


 

SUPPLIES:

Paint

Chalk Paint

Clear and Dark wax

VASELINE

120, 150, 220 grit paper

Steel Wool #3,

Minwax Pre-Stain Conditioner

Minwax stain Provincial


 

TOOLS:

Sander

Brushes

Rags


STEP 1: PREPARE WOOD

I sanded the entire cabinet with my handy palm sander. I started with 120 grit, then sanded it again using a 220 grit.  Take a damp rag and wipe away sanding residual.

STEP 2: PRE-STAIN

Pre stain your wood to help stain penetrate wood evenly.  I used Minwax’s pre stained wood conditioner. I am sure any wood conditioner would work as well. Brush on with a foam brush and let sit for 20 minutes. Wipe away any excess with a cloth.

minwasprestain

STEP 3: STAIN

Stain your wood with the color of your choice.  I just happen to LOVE Minwax’s Provincial right now.  I didn’t stain the entire cabinet        ($$ saving tip).  I only stained the areas I planned on distressing. Ask yourself where normal wear and tear would occur. For example, the corners, edges, raised areas and doors.  I applied the stain using a sponge brush. Brush on, let it sit for a few minutes and then wipe off. I let it sit and dry (about 30 minutes).

STEP 4: SAND and apply VASELINE

Lightly sand it again using 220 grit. Get a small amount of vaseline and place on the areas you want to distress, ie….the areas you want the stain to show through. Keep in mind that you want to dab it in areas where natural distressing occurs (like I mentioned above in step 3). The vaseline makes the top coat of paint practically fall off with ease so apply it wherever you want to distress the piece later.  You can almost wipe it off with a rag so you have to be careful where you put it. Don’t overdo it though.  The vaseline smears easily and can leave you with larger exposed areas after distressing that you may not want.

 

vaselinewood

 

STEP 5: PAINT

Next, begin painting. This is where I chose to have fun. I never settle on 1 paint color. I love to mix different colors to get a new shade. I take a paper plate and drop a teaspoon of each paint color onto the plate. I mix and keep tweaking until I get the color I like. I used THREE different paint colors for my aged teal cabinet.

Paintdabs

mixed paint

I purchased all my paint from  Home Depot, even the chalk paint (TIP: one stop shopping makes life easier). Here are the colors I used:

Behr; Song Bird

Ralph Lauren; Reservoir Blue

 Americana Decor Chalk Paint in Tresor.

After I mixed the three (about a 1:1: ratio), I settled on this lovely teal color. Start painting. I put 2 coats on. Let fully dry between each coat. Tick…tock…tick…tock. I am not patient, so waiting was very hard, but very necessary.

 

STEP 6: DISTRESS

After your paint has dried you are ready to begin distressing.  I used my Ryobi corner cat sander with a 150 grit. I also used course steel wool  (#3) to get into the areas my sander wouldn’t. You can use what works for you.  I focused on the front of the dresser (sides, doors, etc…) for a heavier distressing. Begin on the places you applied vaseline.  The paint in these areas will easily peel off.  Add other distress marks as desired. You can distress as much or as little as you want. I didn’t want a lot of distressing, so I chose to go light on the sanding. (TIP: there are no mistakes that can’t be fixed. If you distress too much in one area, start at step 4 above and re do the area). Make sure to clean off any sanding debris that remains.

STEP 7: WAX

clearwax250

Watch the magic come alive.  I used Annie Sloan clear and dark wax all over. I’ve used Americana Decor wax in clear and dark in the past and it works just as well (TIP: Americana Decor is cheaper than Annie Sloan). I just happened to have Annie Sloan’s waxes on hand and her stuff is amazing. Apply the clear wax first. I used a 2.5″ Purdy bristle brush from Home Depot.  For more information on how to apply Annie Sloan waxes, please refer to her website: www.anniesloan.com. Annie recommends applying a lot of wax, but then taking loads of it off! She says that we need to spread it all over making certain it really soaks into the paint and crevices. However, it costs a small fortune and I didn’t want to waste any wax (or $$). I applied a small amount all over with light brush strokes. After applying it, wipe it off pressing into the paint so it absorbs in. I usually apply it with a brush and then wipe it off with a rag. Now, after you have applied a layer of clear wax, brush your dark wax either all over or in the areas you want to give an aged effect. I chose to brush it all over.  Then take a rag and remove any excess dark wax.  (TIP: Always apply dark wax over clear wax. This will have better control over your toning layer or antiquing effect.).

waxdark250Let the wax dry. It has to DRY!! Another moment where I have to exercise patience. (TIP: wax right before you go to bed. When you wake in the morning, it will be ready to buff).

STEP 8: BUFF

Take a clean, soft rag and buff it. The more you buff, the more shine you get.

STEP 9: ENJOY your new AGED AQUA color

 

AgedAquaCabinet1

I hope you enjoyed this tutorial. Good Luck and let me know if you have any questions. I would love to see your pieces.  😉
Carrie
27 Knockoffs

 

 

Share This:
Facebooktwitterpinterest

Trunk Side Table Tutorial

 

 

DIY Trunk Side Table


I’m in the process of upscaling my living area. It all started with my husband buying a new sectional that didn’t match any of our decor. Instead of buying all new furniture, I decided to make a few pieces to help cut costs, and I did I mention how much I love making things? It was the perfect opportunity for me to hone in on my new wood-working skills. I instantly fell in love with Ana White’s Emmerson Changing Table (by: West Elm).  Pen to paper, I scetched my first plan. My idea became a reality in a few days and it was so simple. I love the rustic reclaimed wood appearance. What do you think?

 

 

DIY Trunk Table


Dimensions: 18 x 18 x 25 3/4″


 

SHOPPING LIST:

5 – 1×2 pine or white wood @ 6′

6 – 1×4 pine or white wood @ 6′

1/4″ plywood cut to 18×18 for base

3 1/2″ Bun Foot Wood Table Legs

Handful of Nail Heads

Hardware of your choice

1 1/4″ pocket hole screws

Wood Glue

1″ & 1 1/4″  nails for nail gun

Minwax Provincial  and Walnut Stain

White paint


TOOLS USED:

Miter Saw

Kreg Jig

Nail gun

Orbital Sander

Drill

Measuring Tape


 

For Front and Back Panels:

viewfromthefront

 

4- 1×2’s @ 17 1/2″ (vertical)

4-1×2’s @ 18″ (horizontal)

10 1×4’s @ 15″ (all going horizontal)


 

For Side Panels:

viewfromtheside

4- 1×2’s @ 17″  (horizontal)

10- 1×4’s @ 17″ (all going horizontal)


 

FOR LID:

4 – 1×4’s @ 18″ mitered at 45 degree angles (for the top)

2-1X2’S @ 18″ (I screwed these under the lid mitered pieces)

2-1X2’S @ 15″ (I screwed these under the lid mitered pieces) Random pieces to fit in the middle. I used scrap pieces and cut to fit or you could use an 11″x11″ piece of 3/4″ plywood. – See more at: http://ana-white.com/node/13607#sthash.OfKz26fM.dpuf


Cutting Instructions:

Take all your 1X4’s and cut them to size. You will have a total of (10) 1×4’s @ 15″ for your front and back panels and (10) 1×4’s @ 17″ for your side panels. I saved cutting my wood for the lid until the very end. Next, cut your 1×2’s to size. You will have a total of (4) 1×2’s @ 18″ (horizontal) and (4) 1×2’s@ 17 1/2″ (vertical) for the front and back panels. You will have (4) 1×2’s @ 17″ (horizontal) for the side panels.
5-layerpanel

Step 1:

Start by making your front and back panels. Glue, screw and attach your (5) 1×4 wood planks together. I made pocket holes on all my 1×4’s, but you don’t have to. You can use wood glue and clamps. Repeat this for your back panel.

newframefrontandback


Step 2 Instructions:

Build your frame for the front and back parts of your trunk. See below. Take your two 1×2’s @ 17 1/2″ long (brown) and drill pilot holes into the ends with your Kreg Jig. Next attach your bottom 1×2 @18″ (green) by using your 1 1/4″ pilot hold screws. Repeat this for your back panel. You will attach your last 1×2 after you add your 5-piece panel of 1 x 4’s.

 NewSideview

 


Step 3 Instructions:

Make your side frames. Add your 17″ piece of wood to the bottom. Attach it by using glue and nails with your nail gun. You cannot use your 1 1/4″ ph screws because they are too long. You could use smaller size pocket hole screws. Do this for the other side too. Remember, you will add your top piece of wood after you insert your 5-layer panel of 1×4’s.

front&backpanelswith1x4s

Step 4 Instructions:

Add your 5-layer panels of 1×4’s to all your frames. I started with my front and back panels first. I added some glue and they fit snugly into the frame. You could use a few nails for extra security by using your nail gun.

completedpanels

 


 

Step 5 Instructions:

Attach your top piece of 1×2 wood (green) by using a 1 1/4″ pocket hole screws. You already made the pocket holes on the vertical pieces of wood (brown). Do this for the back panel too.

box3


Step 6 Instructions:

Complete your side panels in the same way you just did for your front and back panels.

base18x18


Step 7 Instructions:

Attach your now complete base to the 1/4″ plywood bottom. You can screw, nail or glue this portion. I used a nail gun and glue to secure both pieces together.

Step 8 Instructions:

Add the legs per manufactorers instructions

lidslip


Step 9 Instructions:

Make the lid. Use your miter saw to cut the 1×4’s at a 45 degree angle. Attach them together using 1 1/4″ pocket hole screws.

Use scrap pieces of wood to make the center portion of the lid. You can be as creative as you want or simply cut out a piece of wood that measures 11×11. You can use a kreg jig to drill holes and attach the pieces with 1 1/4″ pocket hole screws.

**Optional Step**

I added a “lip” to my lid. I just took some extra 1×2 pieces of wood I had and drilled a screw through them to secure them to the lid. I layed my 1 x2’s flat to the lid (see photo). My lid measured 1″ tall (1/2″ from the 1×4 from the lid & 1/2″ from the side of the 1×2).

viewfromthetop


Step 10 Instructions:

Decide on whether you want to paint or stain it. I got all my inspiration from Ana White’s Emmerson Changing table. So please visit her site to see the exact way I finished it. I did sand all the wood prior to application.
Add your decorative hardware and hinges. I also attached a handful of nail heads to the bottom piece (I attached them to the 1/4″ piece of plywood that was visible).
hope you enjoy this affordable knockoff as much as I do. Total cost excluding the hardware was $65.00!! What a bargain. Price with hardware put me at $100, but still not bad.

Preparation Instructions:
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Finish Used:
To achieve this stain, the entire cabinet was stained a medium stain. Then for the doors, selective boards were sanded down to remove some of the stain, lightening the boards. Other boards were given another layer of darker stain. And for the lighter areas, I taped off areas and sanded all the stain off to give the appearance of a past board to board joint.

 

Share This:
Facebooktwitterpinterest